CNC Two-Tier Pallet Magazine for CNC Machine Tending
The LB-2 CNC Two-Tier Pallet Magazine provides two alternating pallet levels, 35 kg load capacity per tray, ±0.25 mm repeat positioning accuracy and a 6-second layer change. Designed for CNC machining centers, CNC lathes and grinders, it connects to the machine PLC through a reserved I/O interface, allowing automatic pallet feeding without requiring a separate robot arm for the magazine itself.
-
Industrial Robot Double-layer Storage SystemPallet sizes (selectable): 500 x 600 / 620 x 680 / 900 x 950 mmview more
Pallet layers: 2 (customizable)
Deck change time: 6 s
Repeat positioning accuracy: plus/minus 0.25 mm
Compatible... -
CNC Two-tier Pallet MagazineModel: LB-2 series (S / M / L by tray size)view more
Power Supply / Total Power: AC220V / 0.5 kW
Number of Layers / Layer Spacing: 2 layers (customizable); 85 / 100 / 120 mm... -
Cobot Two-tier MagazineModel: LB-X2S / LB-X2M / LB-X2Lview more
Power Supply / Total Power: AC220V / 0.5 kW
Number of Layers / Layer Spacing: 2 layers (customizable); 85 / 100 / 120 mm (customizable)
Tray... -
Two-tier Robot Pallet MagazineModel: LB-G2S / LB-G2M / LB-G2Lview more
Power Supply / Total Power: AC220V / 0.5 kW
Number of Layers / Layer Spacing: 2 layers (customizable); 85 / 100 / 120 mm (customizable)
Tray... -
Collaborative Robot Double-layer Storage SystemPallet sizes (selectable): 500 x 600 / 620 x 680 / 900 x 950 mmview more
Pallet layers: 2 (customizable)
Deck change time: 6 s
Repeat positioning accuracy: plus/minus 0.25... -
CNC Automated Double-layer Storage SystemPallet sizes (selectable): 500 x 600 / 620 x 680 / 900 x 950 mmview more
Pallet layers: 2 (customizable)
Deck change time: 6 s
Repeat positioning accuracy: plus/minus 0.25... -
Automated Industrial Dual-level StorePower Supply: AC220Vview more
Total Power: 0.5kW
Number of Layers: 2(Customizable)
Inter-layer Spacing: 85/100/120mm(Customizable)
Pallet Dimension: 500×600/620×680/900×950mm(Optional) -
Human-interactive Double-level SiloPower Supply: AC220Vview more
Total Power: 0.5kW
Number of Layers: 2(Customizable)
Inter-layer Spacing: 85/100/120mm (Customizable)
Pallet Dimension: 500×600/620×680/900×950mm(Optional)
Two-Tier Pallet Storage for Continuous CNC Feeding
The LB-2 uses an upper and lower pallet arrangement. While one level supplies workpieces to the CNC machine or gantry loader, the other level can be refilled by an operator. When the active level is empty, the magazine switches to the standby level.
This arrangement allows replenishment to take place without stopping the active feeding process. It is suitable for CNC production involving repeated loading and unloading, particularly small-batch and multi-variety machining.
The magazine supports two pallet levels as standard, with customized layer configurations available.
Pallet Sizes, Load Capacity and Technical Specifications
The LB-2 Series is available in S, M and L configurations according to tray size. Standard pallet dimensions include three options, with non-standard pallet sizes also accepted.
| Parameter | Specification |
|---|---|
| Model | LB-2 Series (S / M / L) |
| Power supply | AC220V |
| Total power | 0.5 kW |
| Number of layers | 2 layers, customizable |
| Layer spacing | 85 / 100 / 120 mm, customizable |
| Pallet size | 500 × 600 / 620 × 680 / 900 × 950 mm |
| Non-standard pallets | Supported |
| Load per pallet | 35 kg, customizable |
| Repeat positioning accuracy | ±0.25 mm |
| Layer change time | 6 seconds |
| Control system | Gumei PLC + 7-inch touchscreen |
| Communication | Reserved I/O interface, customizable |
| Safety protection | Emergency stop, overload protection, limit protection and two-layer interlock |
| Working temperature | -10 to 45°C |
| Overall dimensions (W × D × H) | 1750 × 700 × 950 / 2050 × 750 × 950 / 2500 × 1000 × 950 mm |
| Approximate equipment weight | 400 / 550 / 650 kg |
The three frame sizes accommodate different pallet dimensions. For non-standard workpieces or fixtures, pallet dimensions and the corresponding magazine configuration can be customized.
PLC Communication and Automatic Pallet Exchange
The CNC machine tending pallet magazine connects to the machine tool through a reserved I/O interface. Its control system exchanges signals with the machine PLC to coordinate pallet feeding and equipment status.
The standard configuration includes:
- Part-presence detection.
- Layer-position detection.
- Pallet arrival output signals.
- Automatic pallet discharge.
- Low-part alarms.
- Full-layer standby.
- Fault-stop signals.
- Automatic and manual operating modes.
The two pallet levels alternate during operation. The operator can refill the standby level while the other level continues feeding the machine. A 6-second layer change and ±0.25 mm repeat positioning accuracy define the magazine's published exchange and positioning performance.
The LB-2 can supply CNC machining centers, CNC lathes and grinders directly. It can also work with an overhead gantry loader through the corresponding arrival and part-presence signals.
Custom Pallet Magazine Configurations
Zhejiang Luban Automation Technology Co., Ltd. provides customization based on its LB-2 design.
- Pallet dimensions: S, M and L frame configurations or non-standard pallet sizes.
- Layer arrangement: Two layers as standard, with customized layer counts.
- Layer spacing: 85 mm, 100 mm or 120 mm, with customization available.
- Pallet load: Standard 35 kg per tray, adjustable to the project requirements.
- PLC communication: Reserved I/O logic adapted to the CNC machine or gantry PLC signal table.
- Machine structure: Appearance and structural configurations adjusted to the production process.
- Electrical configuration: Control and electrical arrangements customized for the application.
The standard LB-2 configuration uses a Gumei PLC with a 7-inch touchscreen, AirTAC cylinders and Omron electrical components.
Manufacturing, Inspection and Supply Support
Zhejiang Luban Automation Technology Co., Ltd. manufactures and integrates automated loading and unloading equipment. Its production processes include sheet metal cutting, bending, welding, grinding, assembly, system integration and machine debugging.
For the LB-2 CNC Two-Tier Pallet Magazine, the welded frame, linear rails and control cabinet are part of the company's in-house manufacturing and integration process.
| Item | Details |
|---|---|
| Minimum order quantity | 1 set |
| Mixed-model orders | Supported |
| Prototype orders | Available at a higher cost than mass production |
| Standard delivery | 15–25 working days after deposit |
| Customized delivery | 30–45 working days after confirmation and deposit |
| Pre-shipment inspection | 100% inspection |
| Inspection options | Video inspection and third-party inspection by prior arrangement |
| Packaging | Export wooden pallets or wooden crates |
| Trade terms | EXW, FOB and DDP |
The company also provides operating and maintenance training, basic troubleshooting guidance, remote technical support and routine spare-parts support.
Request a CNC Machine Tending Pallet Magazine Quote
To select an appropriate LB-2 configuration, send us your required pallet dimensions, workpiece and fixture weight, preferred layer spacing, CNC machine details and PLC communication requirements.
If you have an existing pallet drawing, machine layout or control signal list, you can include it with your inquiry. Our team can review the requirements and recommend a suitable CNC two-tier pallet magazine configuration.
As one of the most professional CNC machine tending pallet magazine manufacturers and suppliers in China, we also support customized service with low price. With abundant experience, we warmly welcome you to wholesale high quality CNC machine tending pallet magazine for sale here from our factory.
Collaborative Robot Double layer Storage System, heavy duty robot double layer rack, precision two tier numerical control store