Two-tier Robot Pallet Magazine

Two-tier Robot Pallet Magazine

Details
Model: LB-G2S / LB-G2M / LB-G2L
Power Supply / Total Power: AC220V / 0.5 kW
Number of Layers / Layer Spacing: 2 layers (customizable); 85 / 100 / 120 mm (customizable)
Tray (Pallet) Size: 500×600 / 620×680 / 900×950 mm; non-standard trays compatible
Load per Tray: 35 kg (customizable)
Repeat Positioning Accuracy / Layer Change Time: ±0.25 mm / 6 s
Category
CNC Machine Tending Pallet Magazine
 
Send Inquiry
Description
Technical Parameters

 Product Description

The LB-G2 two-tier robot pallet magazine is a floor-standing automatic stocking unit designed to work alongside a six-axis industrial robot in CNC machine-tending cells. Its split upper and lower pallet structure holds two independent work layers: while one layer feeds parts to the robot for picking, the operator refills the other layer, so the machine tool never stops for reloading. AirTAC 25-type cylinders drive the pallets out to a fixed picking position, and proximity switches on each pallet confirm part presence, layer status and arrival signals before handing the part to the robot gripper. Three standardized frame sizes - LB-G2S with 500×600 mm trays, LB-G2M with 620×680 mm trays and LB-G2L with 900×950 mm trays - cover miniature precision parts, regular machined components and larger heavy workpieces respectively, with 35 kg load per tray (customizable) and ±0.25 mm repeat positioning accuracy. The welded steel frame runs on Luban linear rails and reaches each picking station in 6 seconds, while the Gumei PLC with a 7-inch touchscreen handles automatic layer switching, low-part alarms, full-layer standby and fault interlock; the two layers are logically interlocked so they can never move out of phase. The unit carries a robot-body tailstock load rating up to 60 kg, making it a matched storage partner for general-purpose industrial robot arms in batch production of small hardware, shaft parts, flanges and profiles.

 

Purchasers integrating this magazine with an existing industrial robot usually face two hard matching problems: the robot's picking stroke and the cell's floor layout. Because we build the welded frame, the linear rails and the control cabinet under one roof, we can adjust pallet travel, tray size and the reserved IO interlock logic from our own LB-G2 design to the robot's reach and the machine footprint, rather than asking you to conform to a fixed envelope. The same in-house sheet-metal and system-integration chain keeps the ±0.25 mm positioning consistent unit to unit, which matters when a 6-second layer change feeds an unattended night shift. Simple ODM adaptations - tray dimensions, layer spacing and electrical configuration - can be prototyped within 20 to 30 working days, and buyers building several robot cells can order different S, M and L frames in one shipment.

 

 Specifications

Parameter

Specification

Model

LB-G2S / LB-G2M / LB-G2L

Power Supply / Total Power

AC220V / 0.5 kW

Number of Layers / Layer Spacing

2 layers (customizable); 85 / 100 / 120 mm (customizable)

Tray (Pallet) Size

500×600 / 620×680 / 900×950 mm; non-standard trays compatible

Load per Tray

35 kg (customizable)

Repeat Positioning Accuracy / Layer Change Time

±0.25 mm / 6 s

Robot Body Load Rating

up to 60 kg

Control Mode / Communication

Gumei PLC + 7-inch touchscreen, fully automatic; reserved IO interface (customizable)

Safety Protection

E-stop, overload protection, limit protection; two layers interlocked

Overall Dimensions (W×D×H) / Weight

1750×700×950 / 2050×750×950 / 2500×1000×950 mm; approx. 400 / 550 / 650 kg

 Applications

Application 1

Unattended industrial-robot CNC cells. Two interlocked layers keep parts flowing while the operator refills offline, and the up-to-60 kg robot-body rating matches standard six-axis tending robots, so one cell runs through long unmanned cycles on lathes and machining centers.

Application 2

Batch machining of regular parts. Small hardware, shaft parts and flanges need a repeatable pick position: three tray sizes from miniature to 900×950 mm, 35 kg per tray and ±0.25 mm accuracy give the industrial robot one consistent plane for high-volume regular-geometry workpieces.

Application 3

Upgrading manual loading stations. Floor-mounted on adjustable leveling feet, the unit bolts in beside an existing robot and CNC line without a foundation; the reserved IO handshake handles automatic discharge, low-part alarm and fault stop.

 Customization

We offer ODM customization developed from our own LB-G2 design, rather than production purely from customer drawings: the number of layers, layer spacing (85/100/120 mm) and tray size (S/M/L frames or non-standard trays) are adjustable per workpiece, the 35 kg per-tray load can be re-rated, and the reserved IO signal interface is matched to your robot and CNC control logic. The standard build uses a Gumei PLC and 7-inch touchscreen, AirTAC cylinders and Omron electrics, with the frame and linear rails manufactured in-house; appearance, structure and electrical control configuration are adapted to your process requirements. Standard MOQ is 1 set, different models can be mixed in one order, and a prototype is available at above-mass-production cost.

 

 Packaging & Transportation

The equipment is secured on export wooden pallets or in wooden crates, and critical or fragile parts are wrapped in foam and protective film for sea freight. Every unit passes 100% pre-shipment inspection, with video inspection available and third-party inspection accepted on prior notice. We support EXW, FOB and DDP terms; payment is 50% deposit and 50% before shipment for standard units, 70/30 for customized units, in USD. Standard units ship within 15 to 25 working days after deposit, customized units within 30 to 45 working days after confirmation and deposit, and repeat orders of unchanged specifications run roughly 20% faster.

 

 FAQ

Q1. Can the layers, layer spacing and tray size be adjusted for my workpieces?

A1. Yes. The magazine ships as a 2-layer unit with 85/100/120 mm layer spacing and three tray sizes (500×600 / 620×680 / 900×950 mm), and the layer count, spacing, tray dimensions and 35 kg per-tray load can all be customized, including non-standard trays, to fit your parts.

Q2. What is the MOQ, and can I mix S/M/L frames or other models in one order?

A2. Our standard MOQ is 1 set. Customized units are quoted based on complexity, and we support mixing different models or configurations within a single order.

Q3. Do you provide samples, and what are the lead times?

A3. A prototype can be supplied at actual production cost rather than mass-production pricing; we do not provide free samples. Simple-equipment prototypes take 20 to 30 working days; standard units ship 15 to 25 working days after deposit and customized units 30 to 45 working days after confirmation and deposit.

 

Hot Tags: two-tier robot pallet magazine, China two-tier robot pallet magazine manufacturers, suppliers, factory, automated double layer cnc hopper, cnc pallet loading system, cobot dual layer automated bin, collaborative robot two tier rack, industrial robotic two tier bin, pallet magazine for cnc machining

Send Inquiry
Contact us if have any question

Our mission is to earn trust through professionalism and create value through service.

Contact now!